Vol. 02: Resurrecting This Old Amp
Restore an old guitar amplifier and make it sounds as good or better than the day it was made.
Read this article now in your digital edition!
Subscribe to MAKE and get the best rate!
+ Downloads & Extras:
» MAKE: AMENDS Errata for This Article
Correction for page 116
3b should read:
"Reconnect the capacitor, switch the meter to DC voltage, turn off the input signal, and measure across the capacitor. Ours read 74 volts (V). The voltage rating on the capacitor is 75 volts, so there is not much margin in this old amp."
The title for the "Testing current/amperage" figure should be "Testing BFC current". The title for "Testing Voltage" should be "Testing Output Current".
» MAKE: NOISE — Discuss this articleYou must be logged in to post a talkback.
Join the conversation -- every MAKE article has an online page that includes a place for discussion. We've made these RSS and Atom feeds to help you watch the discussions: subscribe.